Piping Material Jobs
The Pipe Fitter: A Job Description
We are quite acquainted with plumbing repairs and unclogging of drains done by the plumber in households. But we are not aware that the pipe fitter job entails many other facets, and its allied work like pipelaying, steamfitting, and plumbing include the installation, repair and maintenance of a host of piping systems and configurations.
The different installation systems include water treatment and distribution from the city water treatment facility to residential homes, commercial and industrial establishments, and office buildings. There is also the waste disposal system, and the fuel distribution systems providing for heating and cooling requirements, as well as fuel to power cooking and heating equipment.
Pipe fitting jobs are also included in power plants that have piping systems carrying steam to power large turbines. Same is true with the manufacturing companies which have piping systems which transmit processing materials across the manufacturing process. These piping systems are most crucial to work environments such as the computer chip manufacturing and pharmaceutical industries.
The Allied Industry Jobs
The plumbing field is composed of different specialties which include steamfitting, pipefitting, plumbing and pipe-laying, and although these are considered components of a single field, various works are done by different tradesmen.
The pipelayers are responsible for setting up the different types of pipes such as oil or gas pipes, water mains, sewers, and drainages, whether these are of plastic, steel, or concrete material. These pipelayers are also responsible for preparing the trenches and channels which will hold the pipes, and they also take charge of the joining of these pipes either through welding, threading, or cementing them together.
The pipe jobs are also tasked to the plumbers who take charge in installing and repairing the water supply, wastewater, drainage and gas systems in residential homes, commercial and industrial establishments, and office buildings. They also do the installation of bathroom fixtures like bathtubs, lavatories, and water closets, and even appliances like the water heaters and dishwashers.
The pipe fitting jobs belong to the turf of the pipe fitters. These pipe fitters go into the installation and repair of pipe systems, whether low or high pressure, which are used in the heating and cooling of buildings, electricity generation and in the manufacturing sector. Depending on their specialization, pipe fitters sometimes concentrate only on specific systems and installations.
Then there are the sprinkler fitters who specialize in the construction of automatic fire sprinkler systems in buildings, and the steamfitters who focus their skills in setting up conveyor systems for different liquids and gases at varying pressure levels.
Getting Involved in the Systems Design
With the upgrading of the profession, pipe fitter jobs have been improved with the pipe fitters getting involved in the design and development of the different systems. Being more familiar with the trade, the pipe fitters have participated in the making of blueprint plans as they have valuable inputs which could considerably cut construction costs.
About the Author
The pipe fitter jobs needs meticulous handling as it holds different aspects and requirements that only highly-trained and skilled professionals can meet. Extra effort and diligence is required from these tradesmen in order to make the pipe fitting jobs successful.
Trying to find jobs for those that does the xrays on pipe lines.?
I'm a medical xray technologist that is interested in changing profession to xraying human being to xraying in the metal/steel industry for the safety and quality of man made materials. I know these kind of jobs exist, just not sure how to go about it.
Thanks
Much of this type of work is done by industrial testing laboratories. Look in the phone book or do a web search for testing labs x-ray. The companies should be able to get you pointed in the right direction.
Piping Material Jobs
Baileigh TN-300 Tube and Pipe Notcher 3" Capacity, Offset Notching, Made in the USA
Tips on copper compression pipe fitting?
Tips on copper compression pipe fitting?
There are several different materials available to consider, black pipe, copper, PVC, rubber hose, etc. Each material has its strengths and weaknesses.Black pipe typically comes in 20', 10' and nipple lengths. Consider purchasing from a local plumbing supply house. They typically they carry a better quality of pipe than the local home supply store at visit here - http://www.fittings-pipe.com
A draw back of black pipe is water and rust. Really, there is only some much that one can do to dry the air. Unfortunately a percentage water does travel in the air stream and will be deposited on the inside of the line. Over time the inside of the line will rust. The question is how long it will take until the rust weakness the wall. Usually a compressor tank will rust out sooner than the air piping.
Tip: Install a tee on the pipe before it transitions to a horizontal run. Have the leg of the tee pointing down. Cap off the end or put a full flow ball valve on the end of the nipple. It will serve a couple of purposes. First, it will help trap debris in the line before it jams your air tools. Second, it will act as a water drain.
Black pipe takes some time and effort to install. It will be necessary to cut and thread the pipe. This will require either having determined before hand, and having the material cut and threaded at the store. Or, rent a pipe threader, manual or powered. Side note, growing up I have cut threads on black and galvanized pipe that was being run for the natural gas lines in a new home (teenage summer job). Cutting threads with a manual tool is not that hard to do; however, power threaders are nice.
Copper is a nice material to use for air distribution system. It is easier to install than black pipe. It does not rust. It will handle the pressure a home air compressor puts out. If the copper tubing fails it will fatigue and bulge out instead of bursting with shrapnel.
Type L and K copper pipe is acceptable for compressed air applications. Type M is NOT. Type M is usually used in residential homes for the fresh water supply lines. The pressure that a copper pipe can handle is dependant on the temperature and the size of the pipe - for more information, see Table 6, Publication 28E, of the CCBDA. The joints are usually rated for less pressure than the pipe.
PVC pipe is very attractive for the home wood worker. It is low cost, easy to install and does not rust. Here is the big problem with it. If / when the pipe ruptures it will send sharp shards of plastic flying and can injure a person. The last thing that you want to have happen is the pipe to fail when your child is in the wood shop with dad. Check out this OSHA bulletin for more information.
I have seen home wood shops that string rubber air hoses along the walls of the shop. The draw back to this solution is that cutting the air hose is not an option since special tools are needed to crimp a fitting on the end. So, what to do? Well just coil up the excess tubing and all is well. Well…. Not really, for each bend in the air line adds turbulence and increases the static air pressure in the line. Thus there will be a significant drop in air pressure at the tool end of the hose compared to the setting on the air compressor's regulator at Tips on copper compression pipe fitting.
About the Author
For more details at - Tips on copper compression pipe fitting and http://www.fittings-pipe.com
|
|
All in One Manual of Industrial Piping Practice and Maintenance: On the Job Solutions, Tips and Insights $41.92 Books on design of pipelines, and equipment such as pumps and compressors are available but almost none on the piping that carries fluid to and fro. This practical, no-frills book offers complete coverage of piping practices and maintenance all in one place. Written by a professional with 35 years of hands-on knowledge and experience in pipeline building, operating, and maintenance, this manual is... |